MX5 Glass Window Hood

PRESTIGE
MX5 Heated Glass Window Hood

Important Glass Window Top Information.

There are many different manufacturers of glass window hoods for the Mazda MX-5. As a Mk.1 MX-5 owner you will already be aware that your hood was originally designed with a zippered clear plastic rear window. The Mk.2 MX-5 hood was designed by Mazda with a heated glass rear screen and no zip. This is the preferred specification for glass window hoods. Many customers ask if they can have a zippered glass window. We have considered this approach and done some testing of these hoods on our fleet vehicles. We have found that the glass exerts some considerable weight onto the zip. This makes it very difficult to zip down and in particular to zip back up again. (It was never easy on a standard plastic window and the potential to damage the zip during normal operation is greatly increased). In addition the extra weight of the glass is considerable enough to cause the rear window panel to sag.

The Prestige Glass Window Hood is not compromised by the limitations of the old zippered design. It is based on the same design as the original Mk.2 hood. The hood is designed for a glass window and folding couldn't be easier. We have maintained all the original features of our standard hoods with bonded double edged seams and extra reinforcements where necessary. Fitting of this hood is well within the capabilities of the average enthusiasts with no special tools or skills required. All fixing holes are pre-cut for a perfect fit and the hood is simply screwed and bolted to the frame. (No trimming necessary).

Compare These Superior Features

Easier Folding Of Hood The Prestige Hood is designed in the same way as the original Mazda MX-5 Mk.2 hood and folds in one simple easy movement up and down. (No messing around to un-zip the window first).
Heated Rear Screen	Quality Enhancements

The glass window is heated (requires original Mazda parts for wiring up to). We use the same contoured glass as seen in the original Mk.2 hood. (Some glass window hoods have flat glass).	At the front we've incorporated a black moulding as used on the original Mk.2 hood. This makes installation to the header rail a little easier but most of all provides for a much neater appearance.
Make A More Informed Choice Prestige Mazda Hoods are engineered to meet or exceed OEM standards of construction and precise fit. As a consumer you need to be aware that not all aftermarket MX5 Hoods are made in the same way. We incorporate many original and unique features into the construction of our hoods that help to resist premature shrinkage and water ingress. These features are explained below. For the benefit of comparison we compare this with a similarly priced but differently constructed aftermarket hood. By knowing and understanding that not all Mazda hoods are made in the same way you will be better informed when comparing and making your purchasing choice.
ORIGINAL MAZDA & PRESTIGE HOOD	NON ORIGINAL HOOD

Bonded Double Faced Edges to Resist Shrinkage See the difference between these two photo's
The sides of the original Mazda & Prestige Hood are double skinned. (See left picture). This is achieved by gluing a second layer of material around the insides of the hood. This second layer re-enforces the sides of the hood and also carries the side tensioning cable. The side tensioning cable is passed through the material and held tightly sandwiched within the sides of the hood fabric. This arrangement not only provides an effective tight seal against the folding frame but the double layer also provides superior resistance to damage and shrinkage.	Some after market hoods for Mk.1 MX5 that we have seen omit to glue the re-enforcement material to the inside of the hood. (See right picture). Instead there is simply a loose flap sewn to the inside edge of the hood through which the tension cables will pass. This is a far quicker and easier construction method that is not original for the Mk.1 MX5 hood.
The price panel below shows the different models we cater for with prices for each material. Click here for details of the different material options Highlighted Prices represent the original standard material or equivalent for your car. Where applicable MH Standard or MH Plus offer you the opportunity to upgrade to a top of the range modern fabric hood. We have indicated our recommendations in the scrolling banner for your consideration. We offer free material samples by 1st class mail to help you choose the correct hood material for your vehicle. Please use the "Contact" button above or telephone your request. All Prices are in £GBP (United Kingdom Pounds). Use this link for currency conversions: `XE.com Universal Currency Converter`

MAZDA
GLASS WINDOW REPLACEMENT SOFT TOPS
MAZDA MX5 90-97 Mk.1 HEATED GLASS WINDOW based on Mk.3 style hood
		Stock Code		Model/Year		Fitting Time (Hrs)		5
		2714		MAZDA MX5 90-97 Mk.1 HEATED GLASS WINDOW OEM Mk.3 style hood, with anti-drip door gutters, no overlapping rear window curtain and no roof seams		Shipping Weight (Kg)		10


Material Options & Prices
Click here for details of the different material options
	HD Vinyl Black	SV Vinyl Black	SV Vinyl Colours	CV Vinyl Black	CV Vinyl Colours	Mohair Standard	Mohair Plus
				*Original
	£285.00	£313.00	£333.00	£351.00	£371.00	£477.00	£522.00
(All prices are subject to 17.5% VAT for sales within the European Community)

MAZDA MX5 90-97 Mk.1 OEM STYLE WITH HEATED GLASS WINDOW
		Stock Code		Model/Year		Fitting Time (Hrs)		5
		2715		MAZDA MX5 90-97 Mk.1 OEM Mk.2 style top WITH HEATED GLASS WINDOW, roof seams and overlapping rear window curtain		Shipping Weight (Kg)		10


Material Options & Prices
Click here for details of the different material options
	HD Vinyl Black	SV Vinyl Black	SV Vinyl Colours	CV Vinyl Black	CV Vinyl Colours	Mohair Standard	Mohair Plus
				*Original
	£315.00	£344.00	£364.00	£382.00	£402.00	£506.00	£551.00
(All prices are subject to 17.5% VAT for sales within the European Community)

MAZDA MX5 98-2005 MK.2 OEM STYLE WITH HEATED GLASS WINDOW
		Stock Code		Model/Year		Fitting Time (Hrs)		5
		2720		MAZDA MX5 98-2005 MK.2 OEM style with HEATED GLASS WINDOW, roof seams and overlapping rear window curtain		Shipping Weight (Kg)		10


Material Options & Prices
Click here for details of the different material options
	HD Vinyl Black	SV Vinyl Black	SV Vinyl Colours	CV Vinyl Black	CV Vinyl Colours	Mohair Standard	Mohair Plus
				*Original			*Original
	£339.00	£367.00	£387.00	£406.00	£426.00	£529.00	£574.00
(All prices are subject to 17.5% VAT for sales within the European Community)