Important
Glass Window Top Information.
There are many different manufacturers of glass window tops for the
Mazda
Miata. As a Mk.1 Miata owner you will already be aware that your
top
was originally designed with a zippered clear plastic rear window. The Mk.2 Miata
top
was designed by Mazda with a heated glass rear screen and no zipper. This is
the preferred specification for glass window tops. Many customers ask if
they can have a zippered glass window. We have considered this approach
and done some testing of these tops on our fleet vehicles. We have found
that the glass exerts some considerable weight onto the zip. This makes it
very difficult to zip down and in particular to zip back up again. (It was
never easy on a standard plastic window and the potential to damage the
zip during normal operation is greatly increased). In addition the extra weight of
the glass is considerable enough to cause the rear window panel to sag.
The Prestige Glass Window Top is not
compromised by the limitations of the old zippered design. It is based
on the same design as the original Miata Mk.2 top. The top is designed for a
glass window and folding couldn't be easier. We have maintained all the
original features of our standard tops with bonded double edged seams
and extra reinforcements where necessary. Fitting of this top is well
within the capabilities of the average enthusiasts with no special tools
or skills required. All fixing holes are pre-cut for a perfect fit and
the top is simply screwed and bolted to the frame. (No trimming
necessary).
|
Compare These Superior Features |
 |
 |
|
Easier Folding Of Top
The Prestige Convertible Top is designed in the same way as the
original Mazda Miata Mk.2 top and folds in one simple easy movement
up and down. (No messing around to un-zip the window first).
|
|
Heated Rear Screen |
Quality Enhancements |
 |
 |
|
The glass window is heated (requires original Mazda parts for
wiring up to). We use the same contoured glass as seen in the original
Mk.2 top. (Some
glass window tops have flat glass). |
At the front we've incorporated a
black moulding as used on the original Mk.2 top. This makes
installation to the header rail a little easier but most of all
provides for a much neater appearance. |
|
Make A More Informed Choice
Prestige Miata Convertible
Tops are engineered to meet or exceed OEM standards of construction and
precise fit. As a consumer you need to be aware that not all aftermarket
Miata convertible tops are made in the same way.
We incorporate many original and unique
features into the construction of our tops that help to resist premature
shrinkage and water ingress. These features are explained below. For the
benefit of comparison we compare this with a similarly priced but
differently constructed aftermarket top. By knowing and understanding that
not all Miata tops are made in the same way you will be better informed when
comparing and making your purchasing choice. |
|
ORIGINAL MAZDA & PRESTIGE TOP |
NON ORIGINAL
TOP |
 |
 |
|
Bonded Double Faced Edges to Resist Shrinkage
See the
difference between these two photo's |
|
The sides
of the original Mazda & Prestige Convertible Top are double skinned. (See left
picture). This is achieved by gluing a second layer of material around
the insides of the top. This second layer re-enforces the sides of the
top and also carries the side tensioning cable. The side tensioning
cable is passed through the material and held tightly sandwiched within
the sides of the top fabric. This arrangement not only provides an
effective tight seal against the folding frame but the double layer also
provides superior resistance to damage and shrinkage. |
Some after market convertible tops for Mk.1 Miata that we have seen omit to glue the
re-enforcement material to the inside of the top. (See right picture).
Instead there is simply a loose flap sewn to the inside edge of the
top through which the tension
cables will pass. This is a far quicker and easier construction method
that is not original for the Mk.1 Miata top. |
|
We can offer the following convertible
tops for Mazda Miata Models
The price panel below shows the
different models we cater for with prices for each material.
Click here for
details of the different material options
Highlighted Prices
represent the original standard material or equivalent for your car. Where
applicable MH Standard or MH Plus offer you the opportunity to
upgrade to a top of the range modern fabric convertible top. We have indicated our recommendations
in the scrolling banner
for your consideration. We offer free material samples by 1st class mail to help
you choose the correct top material for your vehicle. Please use the "Contact"
button above or telephone your request.
All Prices are in US$ for
delivery within the USA only.
For delivery to any other
country please use our
UK & Rest of World sales site
by clicking on this link
|
